Click to Home
Go To Search
Email pagePrint page
CCR water report 2015
CCR Water Report 2015

 

Annual Drinking Water Quality Report

IN5289003

 

CENTERVILLE WATER WORKS

 

Annual Water Quality Report for the period of January 1 to December 31, 2014

 

 

 

For more information regarding this report contact:

This report is intended to provide you with important information about your drinking water and the efforts made by the water system to provide safe drinking water.

 

B

 

Name   ___Brian Markley______________________________________

 

 

 

Phone  ____765-855-5515_____________________________________

 

 

 

 

 

Este informe contiene información muy importante sobre el agua que usted bebe.  Tradúzcalo ó hable con alguien que lo entienda bien.

CENTERVILLE WATER WORKS is Ground Water

 

 

 

 

Sources of Drinking Water

The sources of drinking water (both tap water and bottled water) include rivers, lakes, streams, ponds, reservoirs, springs, and wells.  As water travels over the surface of the land or through the ground, it dissolves naturally-occurring minerals and, in some cases, radioactive material, and can pickup substances resulting from the presence of animals or from human activity.

Drinking water, including bottled water, may reasonably be expected to contain at least small amounts of some contaminants.  The presence of contaminants does not necessarily indicate that water poses a health risk.  More information about contaminants and potential health effects can be obtained by calling the EPAs Safe Drinking Water Hotline at (800) 426-4791.

Contaminants that may be present in source water include:

-   Microbial contaminants, such as viruses and bacteria, which may come from sewage treatment plants, septic systems, agricultural livestock operations, and wildlife.

-   Inorganic contaminants, such as salts and metals, which can be naturally-occurring or result from urban storm water runoff, industrial or domestic wastewater discharges, oil and gas production, mining, or farming.

-   Pesticides and herbicides, which may come from a variety of sources such as agriculture, urban storm water runoff, and residential uses.

-   Organic chemical contaminants, including synthetic and volatile organic chemicals, which are by-products of industrial processes and petroleum production, and can also come from gas stations, urban storm water runoff, and septic systems.

 

-   Radioactive contaminants, which can be naturally-occurring or be the result of oil and gas production and mining activities.

In order to ensure that tap water is safe to drink, EPA prescribes regulations which limit the amount of certain contaminants in water provided by public water systems. FDA regulations establish limits for contaminants in bottled water which must provide the same protection for public health.

 

Some people may be more vulnerable to contaminants in drinking water than the general population.

Contaminants may be found in drinking water that may cause taste, color, or odor problems.  These types of problems are not necessarily causes for health concerns.  For more information on taste, odor, or color of drinking water, please contact the system's business office.

Immuno-compromised persons such as persons with cancer undergoing chemotherapy, persons who have undergone organ transplants, people with HIV/AIDS or other immune system disorders, some elderly and infants can be particularly at risk from infections. These people should seek advice about drinking water from their health care providers.  EPA/CDC guidelines on appropriate means to lessen the risk of infection by Cryptosporidium and other microbial contaminants are available from the Safe Drinking Water Hotline (800-426-4791).

 

If present, elevated levels of lead can cause serious health problems, especially for pregnant women and young children. Lead in drinking water is primarily from materials and components associated with service lines and home plumbing. We cannot control the variety of materials used in plumbing components. When your water has been sitting for several hours, you can minimize the potential for lead exposure by flushing your tap for 30 seconds to 2 minutes before using water for drinking or cooking. If you are concerned about lead in your water, you may wish to have your water tested. Information on lead in drinking water, testing methods, and steps you can take to minimize exposure is available from the Safe Drinking Water Hotline or at http://www.epa.gov/safewater/lead.

If present, elevated levels of lead can cause serious health problems, especially for pregnant women and young children. Lead in drinking water is primarily from materials and components associated with service lines and home plumbing. We are responsible for providing high quality drinking water, but we cannot control the variety of materials used in plumbing components. When your water has been sitting for several hours, you can minimize the potential for lead exposure by flushing your tap for 30 seconds to 2 minutes before using water for drinking or cooking. If you are concerned about lead in your water, you may wish to have your water tested. Information on lead in drinking water, testing methods, and steps you can take to minimize exposure is available from the Safe Drinking Water Hotline or at http://www.epa.gov/safewater/lead.

 

 

Source Water Information

 

 

 

 

 

 

SWA = Source Water Assessment

Source Water Name

 

Type of Water

Report Status

Location

 

 

 

 

 

WELL #1

 

GW

 ___Active_____

 _601 So. Morton_________________________

 

 

 

 

 

WELL #2

 

GW

 ___Active_____

 _601 So. Morton_________________________

 

 

 

 

 

WELL #3

 

GW

 ___Active_____

 _North 4th St.____________________________

 

 

2014

 

Regulated Contaminants Detected

 

 

Coliform Bacteria

Maximum Contaminant Level Goal

Total Coliform Maximum Contaminant Level

Highest No. of Positive

Fecal Coliform or E. Coli Maximum Contaminant Level

Total No. of Positive E. Coli or Fecal Coliform Samples

Violation

Likely Source of Contamination

0

1 positive monthly sample.

2

 

0

Y

Naturally present in the environment.

 

 

Lead and Copper

Definitions: 

Action Level Goal (ALG):  The level of a contaminant in drinking water below which there is no known or expected risk to health.  ALGs allow for a margin of safety.

Action Level:  The concentration of a contaminant which, if exceeded, triggers treatment or other requirements which a water system must follow.

----

If present, elevated levels of lead can cause serious health problems, especially for pregnant women and young children. Lead in drinking water is primarily from materials and components associated with service lines and home plumbing. We are responsible for providing high quality drinking water, but we cannot control the variety of materials used in plumbing components. When your water has been sitting for several hours, you can minimize the potential for lead exposure by flushing your tap for 30 seconds to 2 minutes before using water for drinking or cooking. If you are concerned about lead in your water, you may wish to have your water tested. Information on lead in drinking water, testing methods, and steps you can take to minimize exposure is available from the Safe Drinking Water Hotline or at http://www.epa.gov/safewater/lead.

----

Lead and Copper

Date Sampled

MCLG

Action Level (AL)

90th Percentile

# Sites Over AL

Units

Violation

Likely Source of Contamination

 

 

 

 

 

 

 

 

 

Copper

08/14/2012

1.3

1.3                                    

0.19

0

ppm     

N

Erosion of natural deposits; Leaching from wood preservatives; Corrosion of household plumbing systems.

 

 

 

 

 

 

 

 

 

Lead

08/14/2012

0

15                                     

5.1

1

ppb     

N

Corrosion of household plumbing systems; Erosion of natural deposits.

 

 

 

Water Quality Test Results

Definitions: 

 

The following tables contain scientific terms and measures, some of which may require explanation.

 

 

 

Avg: 

 

Regulatory compliance with some MCLs are based on running annual average of monthly samples.

 

 

 

Maximum Contaminant Level or MCL:

 

The highest level of a contaminant that is allowed in drinking water. MCLs are set as close to the MCLGs as feasible using the best available treatment technology.

Maximum Contaminant Level Goal or MCLG:

 

The level of a contaminant in drinking water below which there is no known or expected risk to health. MCLGs allow for a margin of safety.

 

 

 

Maximum residual disinfectant level or MRDL:

 

The highest level of a disinfectant allowed in drinking water. There is convincing evidence that addition of a disinfectant is necessary for control of microbial contaminants.

 

 

 

 

 

Maximum residual disinfectant level goal or MRDLG:

 

The level of a drinking water disinfectant below which there is no known or expected risk to health. MRDLGs do not reflect the benefits of the use of disinfectants to control microbial contaminants.

 

 

 

 

 

MFL

 

million fibers per liter (a measure of asbestos)

 

 

 

na: 

 

not applicable.

 

 

 

NTU

 

nephelometric turbidity units (a measure of turbidity)

 

 

 

pCi/L

 

picocuries per liter (a measure of radioactivity)

 

 

 

ppb: 

 

micrograms per liter or parts per billion - or one ounce in 7,350,000 gallons of water.

 

 

 

ppm: 

 

milligrams per liter or parts per million - or one ounce in 7,350 gallons of water.

 

 

 

ppt

 

parts per trillion, or nanograms per liter (ng/L)

 

 

 

ppq

 

parts per quadrillion, or picograms per liter (pg/L)

 


Regulated Contaminants

Inorganic Contaminants

Collection Date

Highest Level Detected

Range of Levels Detected

MCLG

MCL

Units

Violation

Likely Source of Contamination

 

 

 

 

 

 

 

 

 

Barium

10/12/2012

0.11

0.05 - 0.11

2

2                                      

ppm     

N

Discharge of drilling wastes; Discharge from metal refineries; Erosion of natural deposits.

 

 

 

 

 

 

 

 

 

Fluoride

10/12/2012

1.1

1.1 - 1.1

4

4.0                                    

ppm     

N

Erosion of natural deposits; Water additive which promotes strong teeth; Discharge from fertilizer and aluminum factories.

 

 

 

 

 

 

 

 

 

Nitrate [measured as Nitrogen]

2014

3

0 - 2.553

10

10                                     

ppm     

N

Runoff from fertilizer use; Leaching from septic tanks, sewage; Erosion of natural deposits.

 

 

 

 

 

 

 

 

 

Selenium

10/12/2012

3.6

0 - 3.6

50

50                                     

ppb     

N

Discharge from petroleum and metal refineries; Erosion of natural deposits; Discharge from mines.

 

 

 

 

 

 

 

 

 

Radioactive Contaminants

Collection Date

Highest Level Detected

Range of Levels Detected

MCLG

MCL

Units

Violation

Likely Source of Contamination

 

 

 

 

 

 

 

 

 

Uranium

12/06/2010

1.7

0.6 - 1.7

0

30                                     

ug/l    

N

Erosion of natural deposits.

 

 Violations Table

Total Coliform

Coliforms are bacteria that are naturally present in the environment and are used as an indicator that other, potentially-harmful, bacteria may be present. Coliforms were found in more samples than allowed and this was a warning of potential problems.

Violation Type

Violation Begin

Violation End

Violation Explanation

MCL (TCR), MONTHLY

06/01/2014

06/30/2014

Total coliform bacteria were found in our drinking water during the period indicated in enough samples to violate a standard.